Working principle

Dust enters the dust collector through the dust suction cover, flow control valve, and dust removal pipeline, and separates gas-solid and gas-liquid through the plastic burning filter plate, and the purified air enters the air inlet of the fan from the upper box. The dust attached to the surface of the plastic burning plate is blown back by the compressed air through the pulse valve, and the dust cleaning control can be selected to work according to time, pressure difference or mixing, and the dust enters the ash hopper under the dust collector body. The bottom of the ash bucket of the single dust collector body is equipped with a screw conveyor, an ash discharge valve, and an ash discharge port. The dust passes through the screw conveyor and the ash unloading port of the ash unloading valve.

Advantages of Internal Fittings of Plastic Burned Plate Dust

Plastic sintered board: Plastic sintered board is a "T" board sintered without adhesive. The reverse blowing direction is the same as the falling ash direction, and it is installed vertically. Also known as: "T" shaped plastic burning board. Color: white, two rulers 1480mm * 470mm * 50mm 1550mm * 1050mm * 50mm.

The filtration areas were 4.5 m2 and 9m2, respectively. Plastic burning board has the ability to resist heavy metal blockage and excellent oil and water resistance, low resistance, long service life. Pulse valve: A special imported large diameter pulse valve, not only has a good ash cleaning effect, but also has a small volume, large flow rate, and a service life of more than 3 million times. The ash cleaning area of each pulse can reach 18m2 (the ash cleaning area of other small diameter valves is 7.5 m2), so the number of pulse valves used is only 40% to 50% of that of similar products, so that the dust collector has the characteristics of small volume, large filtering area and convenient maintenance.

Features of Plastic Sintered Plate Dust Collector

1. Material and manufacturing characteristics of plastic fired board

The material of the wave-type plastic fired filter is made of a variety of polymer compound powders, and the color is white. The manufacturing process does not use adhesives to bond the filter plates to form, but adopts the manufacture of one-time molding and sintering of these various polymer compounds. At present, there are three main types of temperature resistance of products, which are room temperature resistance 70C, heat resistance 110 ℃ and heat resistance 160C. In addition, there are a wide range of anti-static plastic burning boards, acid and alkali resistant plastic burning boards, etc.

2. Shape characteristics of plastic fired plate

Plastic burning board is "white trapezoidal board". The outer shape of the filter plate is characterized by a wavy shape like an accordion box. If they are expanded into a plane, it is equivalent to expanding the surface area by 3 times. The "trapezoidal plate" means that the bottom depth of the wave (also a part that is prone to dust accumulation) is designed as the upper side of the trapezoid, so that it can be forced on three sides when it blows back and is not easy to be blocked. A white plastic burning board of 470 (long) X50 (thick) X1480 (high) has a surface area of 4.5 m2, which is equivalent to the surface area of 6 national standard DMC pulse dust collector bags (133X2000). The interior of the wave filter plate is divided into 9 or 18 cavities. In addition to considering the strength of the element, this design is important for the needs of aerodynamics. It can ensure that when the pulsed air flow blows back to clean the dust, the dust attached to the filter plate is removed at the same time.

The Plastic Burning Plate Dust Collector is an innovative and essential device for various industrial processes. This dust collector is specifically designed to handle the dust and particulate matter generated during the operation of plastic burning plates.

It features a highly efficient filtration system that is capable of capturing fine dust particles with precision. The collector is engineered to ensure a continuous and smooth airflow, preventing the accumulation of dust and maintaining a clean working environment.

The plastic burning plate dust collector is built to be durable and reliable. It can withstand the high temperatures and harsh conditions often associated with plastic burning operations. Its robust construction ensures long-term performance and minimal maintenance requirements.

This device is also designed for easy installation and integration into existing systems. It comes with adjustable settings to accommodate different working scenarios and can be customized to meet the specific needs of the user.

With its ability to effectively remove dust and maintain a clean air quality, the Plastic Burning Plate Dust Collector is crucial for industries that rely on plastic burning processes. It not only protects the workers' health but also helps to meet environmental regulations and standards.